Before you order seat covers, it's worth spending five minutes with a tape measure. Our covers fit most cars and SUVs with bucket seats, but one size fits most, not all. Measuring your seats and checking those numbers against the size chart on the product page is the easiest way to know they'll fit before you buy.

The short version: measure the height and width of each front seat backrest, the width of the rear bench, check whether your front seats have side airbags or armrests, and compare everything with the size chart. Here is how to do each step.

What you'll need

  • A soft tape measure (a sewing tape is ideal because it bends around curves). A metal builder's tape works too.
  • Your phone, to jot down the numbers and take a photo of each seat.
  • About five minutes, with the car parked somewhere you can open the doors fully.

Measure in centimetres if you can. It's the easiest unit to compare with our product pages, which list sizes in centimetres first.

Step 1: Measure the front seat height

Run the tape from the top of the headrest down to the point where the backrest meets the seat cushion. Our front covers also cover the front headrests, so include the headrest in this measurement rather than stopping at the top of the backrest.

Keep the tape against the front of the seat and follow its natural curve. Write the number down, then do the same on the passenger side. Most cars have matching front seats, but it only takes a moment to check.

Step 2: Measure the front seat width

Measure across the widest part of the backrest, from one side edge to the other. On many seats this is around shoulder height, where the side bolsters stick out. Then measure the width of the seat cushion you sit on.

If your seats have big, sporty side bolsters, note that too. The final fit depends on the size, shape and curvature of your seats, and deeply sculpted seats can sit differently to flatter ones, even when the width looks right.

Step 3: Measure the rear seat

If you're ordering a full set or rear covers, measure the rear backrest from the outer edge on one side to the outer edge on the other. Then measure the rear seat cushion the same way.

Two things to know about our rear covers:

  • The rear backrest cover is about 120 cm (47 in) wide.
  • The rear covers don't cover the rear headrests, so you don't need to include those.

The rear seat cover has 2 seatbelt openings. Take a photo of where your rear seatbelt buckles come up through the seat, as this helps if you need to ask us about fit.

Back of a front car seat showing how a printed seat cover is fitted and fastened

Step 4: Check for side airbags and armrests

This is the step people most often skip, and it's the one that matters most. Many newer cars have side airbags built into the outer edge of the front seats. You usually can't see them, but there's often a small label sewn into the side of the backrest that says "Airbag", "SRS Airbag" or "Side Airbag". Your owner's manual will also tell you.

Also check whether either front seat has a fold-down armrest attached to the backrest.

  • If your front seats have side airbags or built-in armrests: choose one of our printed seat cover sets with the "WITH integrated airbags and/or armrests" option. It has a sewn opening on the side.
  • If they don't: choose the "WITHOUT integrated airbags and/or armrests" option.

Please note that our faux suede front seat covers (set of 2) don't fit seats with side airbags or armrests built into the seat. If your seats have either, go for one of the printed sets with the airbag option instead. Our guide to seat covers for cars with side airbags explains how to check your seats and fit the covers properly.

Step 5: Compare with the size chart

Every seat cover page on our site has a size chart in the Fit & Sizing section. Lay your numbers next to it and check each one. As a quick guide, here are the cover sizes listed on our product pages:

  • Printed seat covers, front: about 79.5 cm (31 in) high and 47.5 cm (19 in) wide. Made from soft, stretchy microfibre polyester (280 gsm). Choose a full set of 4, front covers only or rear covers only.
  • Printed seat covers, rear backrest: about 120 cm (47 in) wide.
  • Faux suede front seat covers (set of 2): about 75 cm (29.5 in) high and 47 cm (18.5 in) wide, with a soft faux suede front and a stretchy black polyester back.

Because the fabric stretches, the cover measurements aren't meant to match your seat exactly. That's why the size chart is the thing to check against, not just these numbers. If your measurements sit outside the chart, or you're unsure, email a photo of your seats to support@raianasvibes.com and we'll help you work it out before you order.

Sage Green Daisy faux suede front car seat covers fitted on a driver and passenger seat

Common measuring mistakes

  • Stopping at the top of the backrest. Our front covers go over the headrest, so measure from the top of the headrest.
  • Measuring a straight line across a curved seat. Let the tape follow the shape of the seat, the way the cover will.
  • Assuming all front seats are the same. Check both sides, especially in older cars or cars where one seat has been replaced.
  • Forgetting the airbag label. Check the outer side of both front seats before you choose a set.
  • Not checking seats with unusual shapes. Bench-style front seats, heavily bolstered sports seats or seats with built-in seat belts may not suit our one-size covers. Send us a photo if you're not sure.

Measuring for a gift?

Seat covers make a lovely present, but it's hard to measure someone else's car without giving the surprise away. A few ideas: borrow the car for an errand, offer to give it a clean, or ask their partner to snap a photo of the seat label and take a couple of measurements. Even a photo of the side of the front seat tells you whether to choose the airbag option.

Every set is printed to order. Production takes 5 to 7 business days and delivery takes about 3 to 4 weeks, and standard shipping is free. So if it's for a birthday or Christmas, measure early and order with time to spare.

Once your covers arrive

Our step-by-step video shows how to put them on: how to install our car seat covers. When it's time to clean them, machine wash on a gentle cold cycle and let them air dry. Don't tumble dry, bleach or dry clean them.

Quick answers

Do I need to measure if the covers fit most cars?
Yes, please. Our covers suit most cars and SUVs with bucket seats, but not every seat. Measuring takes five minutes and saves the hassle of a return.

What if my measurements are slightly outside the size chart?
Email us a photo of your seats and your measurements at support@raianasvibes.com. We'd rather help you check before you order than have covers that don't sit well.

Do the covers fit van or truck seats?
Our one-size covers are made for most cars and SUVs with bucket seats. If you drive a Toyota Hiace, see our guide to Toyota Hiace seat covers. For anything else, send us a photo first.

Ready to choose your design?

Got your numbers? Browse our full range of cute car seat covers, from boho florals and retro 70s prints to dark cottagecore, in full sets, front pairs and rear covers, with options for seats with and without side airbags.

November 16, 2026 — Raiana's Vibes