License plate size and dimensions: what fits US and Canadian plates
A standard license plate in the United States and Canada is 12 inches wide and 6 inches high (about 30.5 x 15.2 cm). Every US state and Canadian province has used that size for cars, SUVs and trucks since 1956, so a frame made for a 12 x 6 inch plate fits a plate from any of them. Motorcycle plates are smaller, and plates in Australia, the UK and Europe are a different shape.
Below are the license plate dimensions in one place, plus how to check that a license plate frame will fit your plate before you order.
License plate dimensions at a glance
| What | Inches | Centimetres |
|---|---|---|
| Car, SUV and truck plate (US and Canada) | 12 x 6 | 30.5 x 15.2 |
| Mounting holes, side to side | 7 | 17.8 |
| Mounting holes, top to bottom | 4.75 | 12.1 |
| Motorcycle plate (most US states) | 7 x 4 | 17.8 x 10.2 |
| Our license plate frames (outer size) | 12.2 x 6.3 | 31 x 16 |
Hole spacing is measured from the middle of one hole to the middle of the next. Motorcycle plate sizes can vary a little from state to state.
Why every US and Canadian plate is the same size
Until the mid-1950s each state and province chose its own plate size, so a plate holder that suited one plate didn't suit another. In 1956 the states, the provinces and the car makers agreed on a single size: 6 inches high by 12 inches wide, with mounting holes in the same place on every plate. That is why one license plate frame can fit a plate from California, Texas, Ontario or anywhere in between.
Mounting holes: 2 screws or 4?
A standard plate has four mounting holes, one near each corner. The top pair and the bottom pair are each 7 inches apart, and the top and bottom rows are 4.75 inches apart. Plenty of cars only use the top two screws, and that is fine for a frame as well.
Our license plate frames have 4 mounting holes and are made for standard US and Canadian plates. Before you order, have a quick look at how your plate is attached, so you know whether you'll be using two screws or four.
Will a frame cover my state name or stickers?
A license plate frame sits over the outer edge of the plate. On most plates that edge is empty, but some states print the state name, a slogan or the county close to the top or bottom, and registration stickers often sit in a corner.
Rules differ by state and province. Some places don't allow a frame to cover any part of the plate, including the state name, so check your local rules before you fit one. On our product pages, the Fit & Sizing section has a size chart you can hold up against your own plate.
How to check a frame against your plate
- Measure your plate. A standard US or Canadian plate is 12 x 6 inches. If yours is a different size, a standard frame won't fit.
- Look at the edges. Note where the state name, slogan and stickers sit, and how close they are to the edge.
- Compare with the size chart. Open the Fit & Sizing section on the product page and check the frame against what you noted.
- Count the screws. See whether your car holds the plate with two screws or four.
- Not sure? Email a photo of your plate to support@raianasvibes.com and we'll check for you.
Plates our frames don't fit
- Australian, UK and European plates. These are longer and narrower than North American plates. A standard European plate, for example, is about 52 x 11 cm.
- Motorcycle plates. At about 7 x 4 inches they are much smaller than a car plate.
Our frames are made in US and Canadian sizes only.
About our license plate frames
Each frame is about 12.2 x 6.3 inches (31 x 16 cm), made of printed metal, and wipes clean with a damp cloth. You can order 1 frame, or 2 frames for the front and back. Popular designs include Retro Groovy Vibes, Sage Green Daisy and Retro Sun Rays.
Every frame is printed to order. Production takes 5 to 7 business days and delivery takes about 3 to 4 weeks, and standard shipping is free. If it's a gift, order with time to spare.
Quick answers
What size is a license plate in inches?
12 inches wide by 6 inches high, in every US state and Canadian province.
What are the dimensions of a license plate in cm?
About 30.5 x 15.2 cm (30.48 x 15.24 cm to be exact).
Are front and back license plates the same size?
Yes. Where a state or province issues two plates, both are 12 x 6 inches. Some states only issue a rear plate, which is why we offer 1 frame or 2.
Are license plate frames all the same size?
Frames made for US and Canadian plates are all built around the 12 x 6 inch plate, but the width of the border differs from frame to frame. That border is what can cover a state name or sticker, so compare the size chart with your plate.
Will your frames fit Australian plates?
No. Our frames fit standard US and Canadian plates only.
Ready to pick a design?
Browse our cute license plate frames in girly, boho, daisy and retro prints, and match one to your steering wheel cover or car seat covers.



